Disconnect battery cable. Remove airbag on steering wheel, then pull the wheel off with a puller. The clockspring is located behind the wheel. There are 3 plastic tabs on the backside of clockspring which secure it in place. Bend them back slightly to remove clockspring.
05 clock spring
Drivers air bag code B2293,i changed the clock spring it fixed it...
The clock spring is located inside the steering wheel behind the airbag.
To replace the clock spring on a 1998 Ford, first disconnect the battery to ensure safety. Then, remove the steering wheel by loosening the nut and using a steering wheel puller if necessary. Next, detach the airbag module and carefully unclip the old clock spring from its housing. Finally, install the new clock spring by aligning it properly, reconnect the airbag, reassemble the steering wheel, and reconnect the battery.
under the steering wheel
clock spring
that mean the clock spring is bad and you need to replace it is behin the steering wheel is a round plastic box.
To replace the clock light in your 1991 Ford Taurus, first, carefully remove the clock assembly from the dashboard by prying it out with a flathead screwdriver or trim removal tool. Once the clock is free, locate the bulb socket on the back of the clock and twist it counterclockwise to remove it. Replace the old bulb with a new one, reassemble the clock, and then reinstall it into the dashboard. Make sure to test the new bulb before fully securing everything back in place.
As far as I know the clock spring allows the wiring to the steering wheel horn and cruise control buttons to feed in and out when the steering wheel is turned
It is probably the clock spring in the steering wheel
yes, sure can.
Could be what they call the clock spring if you have an air bag i don't suggest you do it ! The air back system and the clock spring are fragile.