They were available in RWD in at least one GM model,the Camaro.
Please follow this link,look over the ads,etc...."It's in there"!
http://www.camarosource.ca/php/camaro_info_db/index.php?year=1999
(Copy and paste the above URL into your browser,hit 'enter' key.
------------------------------------------------------------------------------
NO! There was never ANY production Camaro that ever came with a supercharger EVER!
The Buick that was supercharged was called the Ultra. On the engine there is another unit mounted on top of the engine. It is driven by a separate belt from the drive shaft. The engine without the supercharger has only one serpentine belt.
You should install it on a hard drive of the computer where you will use the application.
Yes It Is Possible Depending On The Capability Of Your Mobile Phone
Setup.exeInstall.bat
V 8s or higher supercharged or cars with turbo
s/c have instant power there is no lag waiting for your turbine to spool up but it also takes engines power to drive you s/charger turbo uses exhaust gasses to power turbos so there is no power lose to drive turbo its free power
remove the old one, remove the drive pulley. install the drive pulley on the new alternator,lock the shaft with an allen or drill bit thru the housing hole,torq the drive pulley nut, install it like the old one was installed.
This engine uses a chain to drive the single cam. Pushrods and rockers operate the valves on each head. There is no timing belt to break. The serpentine belt only drives the water pump, power steering pump, alternator, and air conditioning compressor. If this is a supercharged engine, a separate belt drives the supercharger.
1996 Taurus never equipped w/ 4 wheel drive
The 2003 Dodge Stratus came optionally equipped in a 3.0L V6 engine. The first step is the disconnection of battery cables. Second, the serpentine drive belt can released and removed. Last, the two bolts holding the alternator to engine mount can be removed and replacement. The OE alternator for the 3.0L application is AC Delco #3341420.
To install drive belt on a 1999 Kawasaki Prairie 400 4x4, access the engine area and remove the cover that holds the clutch. Remove the drive belt around the clutch at the right side of the engine. Replace with new.
By not installing it there. Virtually all programs will allow you to specify the path you want to install the program to. Just change the drive letter and folder to the installation directory.