Push in the socket and turn to the lef until it engages.
no
unscrew the arm rest then the rest is held with clips gently pull the door panel away to expose the old speakers unscrew them then the rest is reversed to install
From the upright position, push the armrest in towards the seat and rotate it backwards a few inches. It will pop off when it is in the right spot. Be careful not to lose the curved washer that goes on the pin as you will need that to reinstall the armrest.
A person can get the old wiper blades off the wiper arms of a Chevy Astro Van by pressing the release latch and sliding them out the end. This allows the blades themselves to be changed without removing the whole arm.
Something is worn for the clearance to be used up, possibly a motor mount.
What year Astro van?
2 screws on the bottom part of the arm rest is the best way.
The Chevrolet S 10 pickup truck idler arm can be removed by removing the idler arm retaining bolts. The idler arm has two retaining bolts. Reverse the process to install the new idler arm.
take valve covers off and then unloosen each rocker arm and pull the push rod out, install new push rod and install rocker arm back on and tighten down nut according to factory specs.
Arm, (Arm rest) Leg, (Leg rest)
I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.
I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.