With an 02 sensor wrench. You practically have to put the car on a lift and if you're not careful you could strip the sensor itself or the "bung" in the exhaust pipe. I would recommend having it done by a mechanic or atleast have them show you before attempting to do it yourself.
how do you install a bank 1 sensor 2 for an 1998 acura tl
The wires that attach to the connector that attaches to the vehicle speed sensor.
it is down by the crank pulley
To locate and change the front speed sensor on a 1998 GMC Sonoma 4X4, first, lift the vehicle and secure it on jack stands for safety. The speed sensor is typically mounted on the front axle housing; trace the wiring harness from the differential to find it. Disconnect the electrical connector, remove the mounting bolt, and pull the sensor out. Install the new sensor by reversing these steps, ensuring the connector is securely attached.
On the console , in front of the armrest
$50 tops
remove and reinstall
To install a height sensor on a 1998 Lincoln navigator is easy. All you have to do is turn your wheels all the way on whichever side you wanting to it on place the part in and screw the four bolts on.
Yes, wheels from a 1998 Mustang will work on a 2000 Mustang.
on the drivers side of the motor, top, front of cam sensor
In the plastic intake tube between the air filter box and the throttle body.
On the console , in front of the armrest ( according to the owners manual )