you can install any kind of tach you want to in your car..if you do not have a stock tach then look in your manual for the rmp sensor wire..should be blue or green coming off the distributor...just splice into it...if you have a stock tach you can just splice into the stock tach wires by taking off the dash
How to install a boost gauge in a acura integra?"
The tachometer on a 1991 Acura Integra is wired through the dash. To reach the wiring remove the dash console and pull out the tachometer. There the wiring can be worked on using a spark tester to find the bad wire and solder unit to replace the wire.
how to install a altinator on a 1991 acura integra
hump it
Connect it to the blue wire on the distributor.Blue wire on the distributor:http://www.jdmuniverse.com/forums/acura-integra-integra-type-r-da-dc2/91736-need-help-wiring-my-jdm-cluster.htmlb18 distributorhttp://www.importtuner.com/tech/impp_0602_honda_civic_b18_cams_install/photo_13.html
Bearings require a mechanical press to be properly changed in an Acura Integra. Remove the hub from the vehicle and take it to a press. The machine will properly install a new bearing and ensure a safe install.
You can install any Honda b series hydraulic transmission to your car, like the integra gsr transmission, or the integra type r transmission
91 acura integra has a b18 91 acura integra has a b18
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.
no
On my 1990 integra, there are like 5-8 bolts underneath and 1 or 2 on the inside of each wheelwell
Save up your money and have the job done by a pro, honestly, its a pain and not worth the savings.