0
What else can I help you with?
Wiring harness for a trailer hitch on a 2003 Jeep liberty?
Trailer wiring harness part #118382 - any local Auto Parts Store should care this.
Where is the connection for the taillight wiring to connect a trailer wiring harness in a 2003 Jeep Liberty Sport?
It is the round connector, with a cover over it, about 6 inches left of and about at the same level as the hitch receiver.
Will the OEM receiver hitch from a 2003 Jeep liberty fit on a 2005 liberty?
Yes, a 2003 hitch will fit a 2005. If you look at Liberty hitches for sale online, they state they fit 2002-2007 Libbies.
How do you install a wiring harness for a trailer hitch on a 2003 Jeep Cherokee?
you have to remove the back driver trim in the back of the jeep..........you will find a green plug, the aftermarket wiring will plug into that.......................good luck
How do you install a towing hitch on a 2003 Jeep Liberty Sport?
It is rather easy you can get a complete bolt on job from Reese Hitches at Walmart and basically follow instructions. My husband did it in a day by himself.
How do you replace power steering pressure switch for Jeep Liberty 2003?
Remove the wiring harness from the 2003 Jeep Liberty pressure switch. Remove the power steering pressure switch retaining screws. Reverse the process to install the new power steering pressure switch.
Where do you find a 2003 ranger rover wiring diagram trailer hitch kit?
http://fawgame.com/?rf=41726368616e67656c this is maybe
Can you set up a 2003 Jeep Liberty sport for a trailer hitch?
4 bolts on the bottom of the frame. The holes are threaded ready to go.
What size hardware is required to install an after sales market trailer hitch on a 2003 liberty?
If your jeep does not have a factory trailer hitch installed then you would look one up online, in a catalog, or go to a hitch dealer, and find one make for your jeep. If you have the factory hitch receiver then you are most likely looking for what is called a ball mount. My 2003 liberty with factory hitch receiver requires a 2 inch ball mount. That's the outside size of the square tubing. You will also need the 'ball' itself. The size required is determined by the 'hitch' on the trailer or device being towed. 1-7/8 and 2 inch balls are common sizes. You may also need a T-One adaptor to hook up the trailer lighting. Anyone competent at Napa, AutoZone, CarQuest, etc. should be able to help you out if you need a personalized touch.
What are the release dates for The Hitch - 2003?
The Hitch - 2003 was released on: USA: 2003 (WYSIWYG San Francisco Christian Film Festival)
Can you bypass fan relay on 2003 Jeep Liberty?
my fan went out on my wifes 2003 jeep liberty. i just spliced a wire from the wiring harness to another wire that turned on when the car turned on and the fan turned on.
What is the size of a hitch receiver for a Ford Explorer 2003?
The hitch receiver on a 2003 Ford Explorer is 2" x 2".
