It is quite easy actually. Take off your wheels, take off your calipers, there are two big bolts on the inner side of the caliper. Once they are off you can pull the rotor right off. If you want a diagram go over to smokinvette.com and type this in the search engine. Good luck!
You will need to remove the tire and wheel from your 2005 Dodge Durango. Remove the brake pad Springs and calipers. Tap the rotors with a hammer to loosen them. Slide the rotors off. Reverse the process to install the new rotors and brake pads.
Warped brake rotors.
WELL, I HAVE A 2005 TOYOTA SUV AND I JUST HAD MY FRONT ROTORS AND BRAKE PADS REPLACED AND IT COST ME 325.00. If you do it your self it is about 140.00
The new pads will last longer, work better, and be quieter if the rotors are resurfaced.
You either have a bad brake caliper or the brake hose is bad.
You do not need a scan tool to replace any brake pads. The wear is obvious.
$600-700 for new rotors and pads, front and rear.
Quote from the dealer is $450.00 per axle, rotors and pads.
The minimum wear or discard thickness is cast into either the front or backside of the rotor
there should be a Honda stamp on the inside center of the rotor
The min thickness should be stamped on the backside of the rotor, pull and examine.
To remove the front brake rotors on a 2005 Kia Spectra, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the front wheel and detach the caliper by unscrewing the caliper bolts; hang the caliper using a wire to avoid stressing the brake line. Next, remove the caliper bracket if necessary, and then take off the rotor, which may require tapping it gently if it's stuck. Finally, reinstall new rotors in the reverse order.