Pipe wrench or channel locks right tight left lose
Generaly the tube goes towards the front of the engine.
how to remove broken dipstick tube ford winstar
bad oil pump or pick-up has fallen off.
If it is the 318 it is on the rear passenger side of the engine beside the distributor
It is connected to the front of the crankshaft, in the area behind the timing belt. There is an oil pick-up in the oil pan at the bottom of the engine, and a tube connects the pick up to the oil pump.
The oil pump is located near the bottom of the engine. Remove the oil pan from the engine. Remove the retaining bolts to the oil pump. Reverse the process to install the new oil pump.
john Deere 318 what oil in hydro does it take
OIL PICK UP TUBE (NOT SITTING RIGHT OR DIRTY) OIL PUMP (OLD WORN OUT) OIL PUMP FILTER (DIRTY) SQUISHED OIL FITER (defective when installed) DROP THE OIL PAN CLEAN AND INSPECT MAKE SURE A NEW OIL PUMP WAS INSTALLED, INSTALL ONE IF IT WASNT CHANGE YOUR OIL FILTER
it is bigger
Back of the engine, next to the distributor.Back of the engine, next to the distributor.
The oil pump should be located inside the oil pan. Drop the pan and it will have a pick-up tube connected to it. Good luck.
If you have the right kind of ez out,pull the piece out. Freeze the net tube over night and install it real quick.