0
Remove the damaged line from the vehicle and take a measurement of the length. Go to your local auto parts store and they will set you up with the line and parts you need. Bend the new lines up to match the original as best you can. Install the new lines and bleed the system, done.
What else can I help you with?
How do you replace caliper on 97 olds achieva?
To replace the caliper on a 1997 Oldsmobile Achieva, first, safely lift the vehicle and remove the wheel. Then, unbolt the caliper from its bracket, disconnect the brake line, and remove the old caliper. Install the new caliper by attaching it to the bracket, reconnecting the brake line, and ensuring all connections are tight. Finally, bleed the brake system to remove any air, reattach the wheel, and lower the vehicle.
How do you change a wheel cylinder on 1997 Grand Am GT?
Remove wheel Remove brake drum Loosen and remove brake line Remove mounting bolts Pry wheel cylinder off brake shoes Install new cylinder Replace brake lines Replace brake drum Bleed affected brake line
Looking for 40 steel brake lines for Oldsmobile 1997 88-Royale Sedan?
I guess I need more info to this one for my own edification.. Do you want forty each of steel brake lines? Or something called "40 steel" brake line?
How much to repair brake line on 1985 Oldsmobile?
do not repair it repace it for safety sake do not shortcut any brake proublems.
How do you replace rear wheel cylinder on 1997 Jeep Wrangler?
Remove wheel and brake drum, disassemble brake parts, disconnect brake line from back side, remove 2 bolts holding cylinder on from backside of brake plate, install new one, tighten bolts, attach brake line, reassemble brake, reattach wheel, and bleed brakes.
Where can you get a 1997 expedition 4wd brake line diagram?
It is important to have a diagram when making a change in the brake lines. A diagram for the 1997 Expedition 4wd brake line can be found in maintenance manual of the car.
How do you fix rusted brake line 1993 camaro?
your mechanic would have to install new brake lines.
How do you replace the Front brake pads 1999 Oldsmobile silhouette?
To replace the front brake pads on a 1999 Oldsmobile Silhouette, first, lift the vehicle and remove the front wheels. Next, remove the caliper bolts, then carefully slide the caliper off the rotor and support it to avoid straining the brake line. Remove the old brake pads from the caliper bracket, compress the caliper piston using a brake tool, then install the new pads and reassemble the caliper. Finally, reattach the wheel, lower the vehicle, and pump the brake pedal to ensure proper brake engagement.
How do you reset 91 olds ninety eight computer?
brake vacuum line location on the 1991 oldsmobile regency 98
Why does your 1997 ford f-150 have a soft brake peddle?
If the brake pedal is soft on a 1997 Ford F-150, then there is a good chance that there is air in the brake line. This can be remedied by bleeding the brakes system.
How do you replace the master cylinder on a 1999 Oldsmobile aurora?
To replace the master cylinder on a 1999 Oldsmobile Aurora, first, ensure the vehicle is on a flat surface and the engine is off. Disconnect the battery, then remove the brake fluid reservoir cap and drain the fluid. Unbolt the master cylinder from the brake booster, disconnect the brake lines using a line wrench (be cautious of any remaining brake fluid), and remove the old master cylinder. Install the new master cylinder, reconnect the brake lines and battery, and refill the brake fluid, bleeding the brakes to remove any air from the system.
How long is brake line in 1999 oldmobile intrigue?
The brake line length in a 1999 Oldsmobile Intrigue can vary depending on the specific configuration and whether it’s for the front or rear brakes. Typically, brake lines can range from a few feet to over ten feet in length. For precise measurements, it's best to consult a repair manual or a parts supplier that specializes in Oldsmobile vehicles.
