you take the wheel off and take the drum off and then you get a haynes book and figure it out. ain't tht hard there pale
Remove the tire and wheel. Remove the brake pad Springs. The brake pads and break assembly will come off. Reverse the process to install the new brake pads.
In the brake master cylinder reservoir on the drivers side of the engine compartment near the firewall
I think it is legal but i haven't heard of this before, but if you did install a superchip "and it works" then i doubt if you get pulled over a cops gonna search your truck for a superchip.
how to install a serpentine belt on 1989 f250 diesel 7.3l
The Ford F250 is a 3/4 ton truck and the F150 is a 1/2 ton truck. The main purpose for these differences, is pointing out the towing capabilities for each truck. The major difference between the F150 and F250 is size and power. The F250 has a more powerful drivetrain and can tow and haul more cargo.
Run the truck backwards to about 10 Mph, hit you brakes very hard. This will adjust your brakes in general.
The brackets that hold the brake pads in place are worn and are allowing the pads to rattle.
it is a f250 1990 ford truck its a f150 1990 ford truck
the gvw on a 1977 f250 8600lbs or 8800 heavy truck 10x better truck than they make today
Where do you find the chassis number on a 1999 Ford F250 truck
You need to specify which module.
Lift the car, remove the tire, remove the brake shoes/calipers, remove and dispose of the old pads. Put in the new pads, replace the brake shoe/caliper, replace the tire and lower the car.