Everyone should have a manual, and the library should have a professional shop manual available for copies in the reference section (FOR FREE)...read up and fix 'em like the pro's...! :) Dave
how do change brake pads on a 2002 dodge pickup 4x4
located at the upper end of the brake pedal under dash area
To install a brake light switch on a 1983 Dodge van with a 318 engine, first disconnect the negative battery cable for safety. Locate the brake light switch, typically found mounted on the brake pedal assembly. Remove the old switch by disconnecting the wiring harness and unscrewing it from the mounting bracket. Install the new switch by reversing the process: secure it in place and reconnect the wiring harness, then test the brake lights before reattaching the battery cable.
Brake Lights Don't Turn OffUsually this issue is caused by an improperly adjusted brake light switch. Sometimes it could be a defective switch, but this is rare.
To change the brake light switch on a 1998 Chevy Cheyenne pickup, first, disconnect the negative battery terminal to prevent electrical shorts. Locate the brake light switch mounted on the brake pedal assembly, usually near the top of the pedal. Remove the electrical connector from the switch, then unbolt and remove the old switch. Install the new switch in the same position, reconnect the electrical connector, and test the brake lights before reattaching the battery terminal.
on your brake pedal lever.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
brake light switch is broken or out of adjustment. brake light switch is located above brake pedal.
The brake lights in your 1983 Nissan pickup truck are controlled by the brake light relay switch. When the brake light relay switch malfunctions the brake lights will stop working.
The brake light switch is typically under the dashboard near the top of the brake pedal arm.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
the brake light switch is on a bracket just above the brake pedal.