To install a brake light switch on a 1983 Dodge van with a 318 engine, first disconnect the negative battery cable for safety. Locate the brake light switch, typically found mounted on the brake pedal assembly. Remove the old switch by disconnecting the wiring harness and unscrewing it from the mounting bracket. Install the new switch by reversing the process: secure it in place and reconnect the wiring harness, then test the brake lights before reattaching the battery cable.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
the brake light switch is on a bracket just above the brake pedal.
Trouble code P0573 means:Cruise control/brake switch A circuit high
The brake light switch on almost all vehicles is located behind the brake pedal lever.
There is a brake light switch or stoplight switch that may be bad on the brake pedal up top.
If it is a gas engine the filter is in the tank and is not recommended till 100k. If it a diesel it is btw the engine and brake master cylinder on driver side of engine compartment
No reset switch on a Dodge Ram.
Dodge does not have a reset switch.
It is on a bracket next to the brake pedal.
On the bracket that the brake pedal pivots on.
dodge 2001 Dakota brake lights won't burn Check the fuses. If the fuses are okay check the brake light switch.
easy