To install torsion bars to keep the trunk lid up on a 1998 Honda Civic DX, first, ensure the trunk is securely supported. Remove the old torsion bars by unscrewing any retaining clips or bolts, then carefully detach them from their mounting points. Install the new torsion bars by positioning them in the same mounting locations, ensuring they are properly aligned. Finally, secure them with the clips or bolts, and check the trunk lid's operation to ensure it stays open.
first you will need to have a crown vick in order to do this,
If it has shocks, replace them. If it has torsion bars one might be broken.
To replace the trunk spring (torsion rod) on a Ford Crown Victoria, first, ensure the trunk is empty and secure. Open the trunk and locate the rods on either side; use a flathead screwdriver to carefully pop out the retaining clips at both ends. Remove the old torsion rod and install the new one by reversing the process, ensuring that the clips are securely fastened. Finally, test the trunk lid to ensure it opens and closes smoothly.
Not too tough, Just use a pair of vice-grip locking pliers to take the old ones out (grab the spring at the J-shaped end and twist to tension/remove from locking part of car). Have a helper hold up the deck lid. Done it before.
You don't!
To open the trunk lid without using the key, pull up the trunk lid release lever. To open the trunk lid, insert the key and turn it clockwise to unlock. The trunk compartment light will illuminate when the trunk lid is
The trunk lid is open.The trunk lid is open.
The trunk lid is open or the trunk ajar switch has malfunctionedThe trunk lid is open or the trunk ajar switch has malfunctioned
Open the trunk and on the inside of one of the bars that holds the trunk lid there should be a sticker with the code on it. thats where it is on mine anyway!
To adjust the trunk lid, you will need to locate the trunk lid hinges or latch mechanism. Use the appropriate tools to loosen the bolts or screws holding the trunk lid in place, then make the necessary adjustments to align it properly. Once aligned, tighten the bolts or screws to secure the trunk lid in its new position.
Trunk (deck lid) is open.Trunk (deck lid) is open.