answersLogoWhite

0

Release tension on and remove the drive belt. Spin each bearing by hand - you will know which one is bad by the "rough" feel. Then check your local parts store.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

What does the water pump on 1993 Ford Tempo look like?

it looks like a water pump that a 1993 ford tempo has.


How do you adjust an automatic tensioner for your drive belt on a 1993 Ford Tempo?

If your tensioner is "automatic", or spring loaded in other words. It is not adjustable in most cases. They are either good or bad. If the spring does not hold the belt tight any longer, the tensioner has to be replaced, no adjustments are able to be made.


Where is the fuel pump located on a 1993 Ford Tempo?

the fule pump is in the gas tank in the 1993 ford tempo


How do you reset a fuel pump switch on a 1993 Ford Tempo?

how do you reset a fuel pump switch on a 1993 ford tempo


How do you replace front bearing on 93 Ford Tempo gl?

To replace the front bearing on a 1993 Ford Tempo GL, first, safely lift and secure the vehicle, then remove the front wheel and brake assembly. Next, detach the hub assembly by removing the axle nut and any bolts securing the hub to the steering knuckle. After that, press out the old bearing using a bearing puller, and install the new bearing, making sure to grease it properly. Finally, reassemble the hub, brake components, and wheel, ensuring everything is torqued to specification.


Where is the air conditioner drain located in a 1993 Ford Tempo?

Were is the ac drain on a ford tempo,


What is tire size for 1993 Ford Tempo?

The factory spec for tires for a '93 Ford Tempo is P185/70R14.


What is the spark plug gap for a 1993 Ford Tempo?

.054


Where can you get a diagram for the transmission on a 1993 Ford Tempo?

Try the Library.


How much horse power on a 1993 Ford Tempo gl?

There is 98 horsepower in a 1993 Ford tempo 2.3. I have one. Ford claims it has 96 but Dyno runs say 98.


What is the firing order for a 1993 Ford Tempo GL 6 cylinder?

The firing order for the 1993 Tempo GL w/ 3.0l V6 is 1-4-2-5-3-6.


What size torx hold on the tensioner on a 1993 ford ranger?

T47