To replace the front bearing on a 1993 Ford Tempo GL, first, safely lift and secure the vehicle, then remove the front wheel and brake assembly. Next, detach the hub assembly by removing the axle nut and any bolts securing the hub to the steering knuckle. After that, press out the old bearing using a bearing puller, and install the new bearing, making sure to grease it properly. Finally, reassemble the hub, brake components, and wheel, ensuring everything is torqued to specification.
how do you replace front door actuator for 93 ford tempo
Take wheel off, put bearing in
How do you replace front wheel bearing on a ford focus
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
How do you replace the PCM ON A 1994 Ford Tempo GL?
you need to remove the entire steering knuckle and have a machine shop press out the hub and bearing for you.
The front wheel bearing need to be pressed by a press. Unless you have a press, I suggest you take it to a shop that has one and have them do it. The bearings can be found at autozone, or advance auto cheaper than any garage can find them for.
Front or rear?? 4x4 or 4x2??
oops i did not mean to click on this and answer it.
There's no such thing as a 1995 Ford Tempo...
Bad wheel bearing, or more than likely a tire with a defect.AnswerIt's normal for a Tempo to hum.
Have to remove the transmission.