answersLogoWhite

0

Answer


You need to pull the codes and see what they say. you'll need a troubleshooting flowchart to do the testing. There are times that the flowcharts will say to replace the ECU, but that is not always the right solution.


Pulling the codes will not always be a solution, however. If the ECU is faulty, or if the ECU has a faulty power supply (e.g. ignition relay to ECU is bad), you may not be able to communicate with the ECU at all.


Each vehicle's repair manual should have a flow chart of ECU diagnostics, outlining what connections/terminals to test for voltage and resistance. Essentially, if you have positively verified that all other electrical components are working properly, and you still have signal problems, then you can assume the ECU is bad.


User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What will a bad ecu do to a Chevy S-10?

If its a fuel injected engine it will cause you many problems


What are the symptoms of a bad ECU in a 1992 Toyota Celica GT?

It is important to know the symptoms of a bad car part. The symptoms of a bad ECU are the check engine light stays on, the car won't start, transmission problems, and bad emissions results.


Where is the ecu temperature sensor on a 2002 S-10?

Need to know what engine you have.


What is the orange engine light mean on vauxhall astra 1.6 2002?

on an earlier model it meant problems with ECU


How do you know when the brain box is faulty in a vehicle?

A faulty brain box, or engine control unit (ECU), can be indicated by various symptoms, such as warning lights on the dashboard, poor engine performance, erratic behavior of electronic components, or failure to start. Diagnostic trouble codes (DTCs) can be retrieved using an OBD-II scanner, which can help pinpoint issues related to the ECU. Additionally, if the vehicle exhibits unusual fuel consumption or emissions problems, it may also suggest a malfunctioning ECU. If these signs are present, it’s advisable to have the vehicle inspected by a qualified mechanic.


If you have a gst and get a knew engine with no turbo can you put one on after?

GST ECU is designed for turbo. you will have problems with ECU, but nothing that can't be resolved. It's a pain, but it can be done with minor motor mount mods.


Why reset the ecu on a 2002 Hyundai Accent?

Resetting the ECU (Engine Control Unit) on a 2002 Hyundai Accent can help resolve issues related to engine performance, fuel efficiency, or check engine light alerts. It clears any stored trouble codes and resets the adaptive learning parameters, allowing the vehicle to recalibrate and potentially improve its performance. This procedure can be beneficial after repairs or maintenance to ensure the ECU accurately reflects the current state of the vehicle. However, it's essential to address any underlying issues before resetting the ECU to prevent recurring problems.


VW Ahu engine need an ecu?

Yes, the VW Ahu engine requires an ECU (Engine Control Unit) to manage its operation. The ECU controls various engine functions, including fuel injection, ignition timing, and emissions. Without a functioning ECU, the engine may not run properly or at all, as it relies on the ECU for optimal performance and efficiency.


Lincoln mark 8 ecu?

ecu= engine control unit


Does a car run when ecu is unplugged?

Assuming you mean the engine ECU, the answer is no


Where is ecu or ecm located on 4200 vortex engine?

The ECM or ECU is located inside the vehicle that the engine is installed in. These units are never mounted on the engine.


Honda Prelude 92 engine light flash?

When a check engine light appears on a 1992 Honda Prelude dashboard it means the ECU is get an abnormal reading on one of the automobiles functions. Use a diagnostic tool to flash the ECU and find the problems associated the car. The flash will also turn off the check engine light.