Take a 12mm socket and try to fit it over one of the mounting bolts (the threaded part sticking out past the nut), if it fits you have 12mm idler arm, if not you have 14 mm idler arm
Does anyone know how to take off a radiator fan clutch from a 1998 Dodge Dakota 3.9 V6
***SUM'S Answer***-As far as I know, owning a Dakota with a 318. Yeah it should work.
Wasn't aware a Merc 190 had an idler arm. However, clunky steering and wander. Observation of the idler arm will show excessive lateral movement
all i know is it can be used in a transmission goodbye
im not a Mexican so i don't know. Dakota = Dakota
to know which manifold fits, you need to know what engine is in the truck
you will know if it fits if it is tight and it is not lose on your head cause if it is you should tighten. Have fun rideing
By what fits into them.
Yes. as far as I know.
Normally the idler wheel will have a bad bearing and will make a lot of grinding noise and or vibrate big time! If the bearings go out all together you will know real quick like as it will most likely burn or rip the belt off!
There are many types of warning lights on the Dodge Dakota. In order to know what a specific light means we need to know which light it is and what year the Dakota is. 2000
If it fits in your butt