Get very thin eyebrow twizers, and pull the broken lock! Listo..
TAke the bolts soose that hold it on. It is an assembly.
remove the oil pan or slide a magnet fasten to a flexable stick down the dip stick chase
Cut the dipstick tube with a tubing cutter below broken dipstick and remove Use rubber tubing and hose clamps to reattach tube pieces
Remove the lock and fit another one. Once you remove the handles and driveshaft it will be apparent how to remove the latch mechanism.
how to remove the vent from dashboard of 1996 ford contour
First make sure rear service brakes are adjusted properly There should be a small nut located at the side of the emergency brake handle (may have to remove plastic trim to access) Set brake to 3 clicks and wheels should be locked at that position
dynamite
You don't.
You can use pliersto turn back but igintion will need replacement.
You can try using tweezers, a small screwdriver, or a key extractor tool to carefully remove the broken key from the lock. If these methods don't work, it's best to contact a professional locksmith to safely extract the broken key without causing damage to the lock.
get a mechanic? (are you retarted?)
take off the screws