open the bonnet
Open the door with your key and pull the bonnet release.
Swivel ford badge on front grill, insert ign. key turn clockwise, then anticlockwise. Bonnet opened
To open the bonnet of a 2009 Ford Mondeo, first, locate the bonnet release lever inside the vehicle, usually found near the driver's side footwell. Pull the lever to release the initial catch. Then, move to the front of the car and find the safety catch under the bonnet, which you can usually access by sliding your hand under the center of the bonnet. Lift the bonnet fully, and secure it with the prop rod if necessary.
To open the bonnet on a 2008 Ford Mondeo, first, locate the bonnet release lever inside the vehicle, typically found on the driver's side near the footwell. Pull the lever to release the initial catch. Then, move to the front of the car, slide your hand under the centre of the bonnet to find the secondary catch, and lift the bonnet while disengaging this catch. Finally, secure the bonnet with the prop rod if necessary.
took mine to local mechanic who got it to open by pushing the key in real deep towards the rihgt. He then grinded down the latch and now bonnet opens by just turning key to left!!! and it didnt cost much. ingenious.
DEALER SAYS PRESS THE LEVER UNDER THE FRONT BADGE ON THE OUTSIDE GRILL HAD THE SAME PROBLEM
Behind the badge on the grill twist it around insert key and turn one way to release then the other to open
To reset the bonnet open light on a Ford Mondeo, first ensure that the bonnet is securely closed. Next, turn the ignition on without starting the engine, and check if the warning light goes off. If it remains lit, you may need to check the bonnet latch and electrical connections for any issues. If problems persist, consult the vehicle’s manual or a professional technician for further assistance.
On a focus you swivel the actual ford logo on the front of the car to reveal an extra keyhole - put the key in and turn and up it goes! Might be totally different for a mondeo tho. Hope this helps!
If the bonnet release lever on a Ford Mondeo 2008 is broken, you can try accessing the bonnet by manually pulling the release cable. This can usually be done by removing the plastic cover under the dashboard near the driver's side to expose the cable. Alternatively, you may need to use a flat tool to pry open the bonnet latch from the front grille area. If these methods fail, it may be necessary to seek professional assistance to avoid damage.
To open the bonnet of a 2001 Ford Mondeo without a key, you can try using a flathead screwdriver to manipulate the release mechanism. Look for the latch under the front grille or near the driver's side of the vehicle. Carefully insert the screwdriver to press the latch and release it. If this method doesn't work, consider contacting a professional locksmith or mechanic for assistance.