0
What else can I help you with?
Will a 1976 Chevy 350 4 bolt main be swapped to fuel injection and put in a 1998 gmc Serra with a 350?
NO. There is alot more to a 98 350 then just fuel injection. That year truck MUST have ALL the electronic engine sensors on it and working are the transmission will not even work. The 76 350 has NO place for the engine sensors to go. So it won't work.
What is DI?
DI means Direct Injection. Diesel engine depending on combustion categorised in Direct injection or InDirect injection Engine. Direct Injection engine combustion takes place directly above the piston. But indirect injection combustion initially takes place pre-combustion chamber and after transfered to above piston.DI engine more fuel efficient, easily start in cold condition, But Noise more.
How do you drain the engine coolant in 1990 Chevy Corsica?
Place something to catch the engine coolant beneath your 1990 Chevy Corsica radiator. Remove the radiator drain plug with a 9/16 ratchet. The engine coolant will drain out.
Will a 2001 Chevy 350 fit in place of a 1997 350 in a silverado?
Chevy did not have a 350 in 2001 engine options were 5.3, 6.0. or big block
How do you install a Fuel Injection Pump for a 99 Chevy Metro?
To install a fuel injection pump in a 1999 Chevy Metro, first, disconnect the negative battery cable and relieve the fuel system pressure. Remove the fuel tank or access panel to reach the pump, then disconnect the electrical connectors and fuel lines from the pump. Replace the old pump with the new one, ensuring proper alignment and securing it in place. Finally, reassemble the fuel system, reconnect the battery, and test the system for leaks before starting the engine.
Can a 2.2 liter engine from a 1996 Chevy Cavalier be put into a 1990 Pontiac Sunbird in place of a 2.0 liter engine?
Yes. You will need to mount the engine 60degrees, however.
How do you install injection pump of c240 engine?
To install the injection pump on a C240 engine, first ensure that the engine is at TDC (top dead center) on the compression stroke for the number one cylinder. Carefully align the injection pump with the drive gear, ensuring that the timing marks are correctly aligned. Secure the pump in place with the mounting bolts, and reconnect any fuel lines and electrical connections. Finally, check the pump timing and make any necessary adjustments before starting the engine.
How do you time injection pump on cummins QSB4.5L?
To time the injection pump on a Cummins QSB4.5L engine, first ensure the engine is at top dead center (TDC) on the number one cylinder. Next, align the timing marks on the injection pump gear with the corresponding marks on the engine. Once aligned, secure the pump in place and check the timing with a dial indicator to ensure it meets the manufacturer’s specifications. Finally, reassemble any components removed and run the engine to verify proper operation.
Where is a catalytic converter located on a Chevy Impala?
between the engine and the muffler underneath the car would be the logical place.
Where is the location of O2 sensor 1995 Chevy Astro?
1995 Chevrolet Astro, 4.3 V6 engine with Single Point Injection System has one O2 sensor located in exhaust pipe (between catalitic converter and the place where exhaust pipes from right and left cylinder heads meets in one pipe).
2005 trailblazer 4.2 engine can you drive without the air box cover in place?
You can drive your 2005 Chevy Trailblazer 4.2 liter engine with salt the air box cover in place. It is not recommended to do so, because cost particles can get into your engine.
What is tbi injection?
TBI stands for: Throttle body injection. That is what took place of the carburetor and it's mounted on the top center of the engine under the air cleaner on the intake manifold. It looks like a carburetor but it's not, it has 2 fuel injectors in the top of it.
