This is all I have on keyless entrys.I hope it helps. Sit inside the vehicle with all the doors closed. Place ignition in the OFF position. Open the driver's door. Leave Open. Move the mechanical door lever to the LOCK position. Turn the ignition to the RUN position. Aim the transmitter at the Keyless Entry receiver and press Lock button. Hold for five seconds until the door locks cycle. Turn ignition OFF within 20 seconds.
it has to be done by the dealer. =(
You have to program it with a DRB (Scan tool).
I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".
dealer has to do it with factory scan tool
The keyless entry system must be programmed with an OBD II tool which the dealer or locksmith has. Sorry that this is not the answer your looking for, I didn't want to hear it either.
YOU CAN FINE ALMOST ANY KEYLESS ENTRY ON EBAY AND FOR A GOOD PRICE.. GOOD LUCK.........
how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)
It requires the dealer's scan tool.
How do you program the keyless entry on a 2005 Ford E350 Van?
how do you program keyless entry remote 98 GMC
bring it to a dealer or a shop that puts them in you need a special computer and codes
this is located in passenger door switch