0
To program the keyless entry remote you hold down the lock and unlock keys at the same time while within 10ft of vehicle to make sure you are within range of the remote for approx 10 seconds. the vehicle will alert with a short horn sound. if it does not respond, repeat. should only take 1-3 tries before it's done
What else can I help you with?
How do you program keyless entry remote for 1989 Buick Park Avenue?
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
How do you program a keyless remote to Buick Roadmaster 93?
Sell It!!
How do i Program fob key?
how do i program keyless remote for 2000 Buick LeSabre
Where is the keyless remote module in a 92 buick regal?
Where remote module in a 98 buick regal
2000 buick century but no keyless remote but have keylessremote for a 2003 ponitiac gprix can you program it to the buick?
look on the back of you remote it has to have these numbers gm: 10246215 and model/fcc id: abo0204t if you need the program procedure please ask or post (locksmith)
How do you program a 2001 Buick Park Avenue Key remote?
More often than not, a Buick Dealer service dept. will do it for you at no charge, IF one of the service advisors know how, and a lot of them do.
How do you program keyless entry remote for 1997 buick lesabre?
Follow this link and you're good to go. Let me know if you have any questions. I've done this myself so I know how to do it. .ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
How do you program a remote for a 2003 Buick LaSabre?
How do i program my remote car starter / lawless remote
Were can you get a replacement keyless remote to your 99 Buick lesabre?
I found some great deals on keyless remotes on ebay. You can also order them from an auto parts store or you Buick dealer.
How do you program a keyless entry remote 2007 buick lucerN?
To program a keyless entry remote for a 2007 Buick Lucerne, sit inside the car and close all doors. Insert the key into the ignition and turn it to the "On" position (without starting the engine) and back to "Off" five times within 10 seconds. After the fifth turn, the locks will cycle to indicate the vehicle is in programming mode. Press and hold the lock and unlock buttons on the remote simultaneously for about 15 seconds until you hear a confirmation sound, then test the remote.
How program the keyless remote for 2005 Buick Lacrosse with autostart?
To program the keyless remote for a 2005 Buick LaCrosse with autostart, follow these steps: First, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds, then release them. Finally, turn the ignition off to complete the programming process. If successful, the doors should lock and unlock to confirm that the remote is programmed.
How do you program a keyless remote for Buick 2006 Lucerne?
To program a keyless remote for a 2006 Buick Lucerne, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off" and remove the key. Repeat this process twice, then insert the key again and turn it to "On." Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds until the doors lock and unlock, confirming successful programming.
