how do i program keyless remote for 2000 Buick LeSabre
Ign off, On the data link connector use a wire to jumper terminal #8 (black/white) wire to #4 (black) wire, Turn Ign on press and hold unlock and lock button on one transmitter locks will cycle, repeat for second transmitter, disconnect wire, should do it. That is basically correct but there are more detailed instructions with a diagram at the following site: How to Program a Replacement Keyless Remote on a 1997 Buick LeSabre | eHow.com http://www.ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
Amazingkeys.com has the 2000 Buick LeSabre Key. It does have the chip in it.
Where remote module in a 98 buick regal
Follow this link and you're good to go. Let me know if you have any questions. I've done this myself so I know how to do it. .ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
It could be the remote has a dead battery. If both remotes don't work, seems like the sensing unit in the car has failed. The remote battery is the easier problem to fix.
Sell It!!
Dealer? Locksmith?
To open the keyless remote for a Buick LaCrosse, locate the small slot or notch on the side of the key fob. Use a flathead screwdriver or a similar tool to gently pry apart the two halves of the remote, being careful not to damage the casing. Once opened, you can access the battery or internal components for replacement or repair. Reassemble the remote by aligning the halves and pressing them back together until they click.
To replace a keyless remote for a Buick LaCrosse, first, obtain a compatible replacement key fob, either from a dealership or a certified retailer. Next, insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the new remote simultaneously for about 10 seconds, then release them. Finally, turn the ignition off to complete the programming process.
How do you replace fuel filter on 1993 Buick LeSabre, the replacement filter I bought appears to be a snap on. I have only replaced the screw on type.