Ign off, On the data link connector use a wire to jumper terminal #8 (black/white) wire to #4 (black) wire, Turn Ign on press and hold unlock and lock button on one transmitter locks will cycle, repeat for second transmitter, disconnect wire, should do it.
That is basically correct but there are more detailed instructions with a diagram at the following site: How to Program a Replacement Keyless Remote on a 1997 Buick LeSabre | eHow.com http://www.ehow.com/how_7291758_program
-remote-1997-buick-lesabre.html#ixzz1HA
YkCKDX
how do i program keyless remote for 2000 Buick LeSabre
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
Sell It!!
I found some great deals on keyless remotes on ebay. You can also order them from an auto parts store or you Buick dealer.
Follow this link and you're good to go. Let me know if you have any questions. I've done this myself so I know how to do it. .ehow.com/how_7291758_program -remote-1997-buick-lesabre.html#ixzz1HA YkCKDX
Where remote module in a 98 buick regal
look on the back of you remote it has to have these numbers gm: 10246215 and model/fcc id: abo0204t if you need the program procedure please ask or post (locksmith)
It could be the remote has a dead battery. If both remotes don't work, seems like the sensing unit in the car has failed. The remote battery is the easier problem to fix.
YOU WILL HAVE TO USE A GM PROGRAMER TECH 1 OR TECH 2 I DON'T REMEMBER THE YEAR BREAK
How do i program my remote car starter / lawless remote
In the owners manual it tells. On my 93 lesabre I had to jump two of the connetors on the code reader
To program the keyless entry remote you hold down the lock and unlock keys at the same time while within 10ft of vehicle to make sure you are within range of the remote for approx 10 seconds. the vehicle will alert with a short horn sound. if it does not respond, repeat. should only take 1-3 tries before it's done