0
I have a RAM 3500 and the "how to program a new remote is in my owners manual under remotes" On the 3500 the info starts on page 23 and the actual programing instructions is a couple of pages further than that. I could type the info but you should be able to find the stock owners manual online too.
What else can I help you with?
How do you program a keyless remote for a 2001 dodge ram 1500?
It requires the dealers scan tool.
How do you program a keyless remote for a 2005 Dodge Ram 1500 if you do not have a working remote and there is nothing in pin 1 of the data link?
It requires the Dealer's scan tool.
How do you program extra keyless remotes for 2003 Dodge Ram 1500 when you have one remote that is already programmed?
You will need a scan tool to do that.
Does a 2003 Dodge Ram 1500 have a keyless remote?
Yes, it could.
How do you program a keyless remote for a 2002 Chevy 1500 pickup?
programyourremote.com simply put.. "Program Your Remote.com"
How do you program keyless remote 2003 dodge ram 1500?
The factory scan tool is required.The factory scan tool is required.
How do you program keyless remote for a 1997 dodge ram 1500?
To program your keyless remote, locate the dark green program enable wire and connect to the wire enable terminal. Insert your ignition key and turn the switch to on while depressing either button on the transmitter. Disconnect the program enable wire terminal and remove the key from the ignition.
On 1998 dodge ram 1500 laramie slt do power door locks mean that remote keyless entry is an option?
It can have power locks with out keyless.
How do you program a keyless remote for a 2002 dodge ram 1500 if you have no original key fobs?
That requires the dealer's scan tool.That requires the dealer's scan tool.
How do you program a keyless remote for a 2003 dodge ram 1500?
To program a keyless remote for a 2003 Dodge Ram 1500, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it from "Off" to "On" four times within 10 seconds, ending in the "On" position. The locks should cycle, indicating the vehicle is in programming mode. Press any button on the remote; the locks will cycle again to confirm programming. Repeat for additional remotes if needed, then turn the ignition off to exit programming mode.
Does 1994 Dodge Ram 1500 have keyless remote?
It was an option, but very few had it.It was an option, but very few had it.
Does 1998 dodge ram 1500 sport have keyless remote?
My 98 Ram sport does it is a control module behind the dash if your does not and can be installed quick at the dealer .
