To program a remote control for a 2004 Ford Freestar, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it to the "On" position (not starting the engine) and then back to "Off" eight times within ten seconds, ending in the "Off" position. After a chime sounds, press any button on the remote within 30 seconds to program it. Repeat the process for additional remotes, then turn the ignition back to "On" to exit programming mode.
To program a new remote for a 2004 Ford Freestar, first, sit in the driver's seat and close all doors. Insert the key into the ignition and turn it from the "Off" position to "Run" eight times within ten seconds, ending in the "Run" position. Once the locks cycle, press any button on the new remote within 20 seconds to program it. Finally, turn the ignition off to complete the process; the locks should cycle again, confirming the remote is programmed.
REMOTE CONTROL KEY COULD NOT WORK TO OPEN THE DOOR OR OTHER FUNCIIONS
To program the remote control for a 2004 Honda Odyssey, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within five seconds, press the "Lock" button on the remote for one second and then release it. Repeat this step for each additional remote you want to program. Finally, turn the ignition off and test the remote to ensure it works properly.
How do i you program keyless remote for a 2004 malibu?
how can i program a remote for a 04 kia spectra
If you have 2 (a pair) it tells you in owners manual to program the 3rd. If you are programming a second, you will have to goto dealer so they can program it with drb3.
Dealership
LazyTown - 2004 Remote Control 1-22 is rated/received certificates of: Australia:G
Ford Freestar was created in 2004.
LazyTown - 2004 Remote Control 1-22 was released on: USA: 2 August 2005
Must be programmed by a GM dealer.
( 26 U.S. gallons ) for a 2004 Ford Freestar