Does it have a nav screen? if so follow these steps -press the config hard button below the screen -go to i believe occupant information and then there should be a driver 1 and driver 2 button go into either or and then position your seat and then you should be able to press a save button or something simmilar sry if this was a little bit off or not quite complete but it should be close enough, didnt want to go out to my car to look :P
Use an axe
It is located under the rear seat. The seat is easily removed by lifting sharply on the lower front lip of the seat.
It is located in one of the fuse panels under the rear seat.
To program a keyless entry remote for a 2005 Cadillac SRX, first, sit in the driver's seat with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" and "Unlock" buttons on the remote simultaneously for about 15 seconds, then release. Finally, press the "Lock" button once more to complete the programming process; the locks should cycle to confirm successful programming.
To lift the seat in a 2000 Cadillac, locate the seat adjustment lever or switch on the side of the driver's seat. If it’s a manual adjustment, pull the lever upward while simultaneously pushing the seat down to raise it. For power seats, push the front of the switch up to elevate the seat. Ensure the vehicle is in a safe position before making adjustments.
it is underneath the rear seat behind the driver seat. you have to pull the carpet forward to see the fuse box
To program the driver seat memory in a 2001 Lincoln Navigator, first adjust the seat to your desired position. Then, locate the memory buttons on the door panel, typically labeled "1" and "2." Press and hold the "Set" button until you hear a beep, then press and hold either the "1" or "2" button to save your seat position. Release the buttons when the seat adjusts to the saved position to confirm the programming.
remove passenger seat in 2003 cadillac cts
To program the seat memory on a Hyundai XG350, first adjust the driver's seat to your desired position. Then, locate the seat memory buttons, usually found on the door panel. Press and hold the "Set" button until you hear a beep, then press one of the numbered memory buttons (1 or 2) to save the position. To recall the saved position, simply press the corresponding memory button.
unscrew the bolts and take the seat out
Cadillac seat covers will keep any Cadillac vehicle looking new for the years to come. These seat covers are available through automotive stores, eBay, and Amazon among other sources.
One can try out a Cadillac seat from many car retailers that sell cars with a Cadillac seat. It is worth calling a local show room to see if they have one.