0
Place ignition in the OFF position.
Open the driver's door. Leave Open.
Move the mechanical door lever to the LOCK position.
Turn the ignition to the RUN position.
Aim the transmitter at the Keyless Entry receiver and press Lock button.
Hold for five seconds until the door locks cycle.
Turn ignition OFF within 20 seconds.
What else can I help you with?
How do you program your keyless remote for a 1998 grand Cherokee?
the dealer does it with a scan tool
How do you program a keyless entry remote for a 2004 Jeep Grand Cherokee?
You have to program it with a DRB (Scan tool).
How do you program a key less entry remote for a 2003 Jeep Grand Cherokee?
I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".
How do you program the keyless remote entry for a 2000 Jeep Grand Cherokee Laredo?
dealer has to do it with factory scan tool
How do you program a keyless entry fob for a Jeep Grand Cherokee?
it has to be done by the dealer. =(
Why doesn't the keyless remote work unless it is close to the car on a 2004 Jeep Grand Cherokee?
Possible weak battery in the remote.
How do you replace 1995 grand Cherokee keyless remote?
I had to replace a keyless remote for my 2001 dakota. I found one off od E-bay then I had to program it using the programing sequence in the owners manual. It was really simple. I only paid something like ten buck for the remote and have had no problems.
Where is the receiver for the keyless remote in a 1999 Jeep Grand Cherokee?
centre top dashboard (red dome)
How to troubleshoot keyless entry problems in a 95 Grand Prix SE if the remote does not work even with a new battery?
how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)
How do you reprogram a 2000 Jeep Grand Cherokee Keyless Entry?
To reprogram a 2000 Jeep Grand Cherokee keyless entry remote, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 10 seconds, turn the key to the "Off" position and back to "On" three times, ending in the "On" position. After a chime sounds, press any button on the remote to program it. Repeat this step for additional remotes, then turn the ignition to "Off" to exit programming mode.
How do you program a keyless remote Pontiac grand prix 2006?
go to http://www.programyourremote.com/ they have programs for many makes and models
Can you program a keyless remote entry from a 1999 Jeep Grand Cherokee to work with your 2004 Jeep Grand Cherokee?
I am trying to find out how to do the reprogramming, but haven't found out how, but did find out that from 1999- 2004 the door lock fobs are interchangeable. You may need to take to Jeep dealer to actually get it programmed, but at least you won't have to buy a new fob.
