0
To the best of my knowledge on this truck you have to first remove the Power Steering pump then get a tool called a "power steering pully puller" and make sure you get one with the power steering pully installer with it. Your local auto parts store will have one and a few have ones they will loan you. The parts representative there should be able to instruct you on the proper use of both tools.
What else can I help you with?
Power steering problems?
power steering pump failure ----------------------- If it is a Dodge truck then i see alot of Power steering pump shafts that are broken. To test, then pull on the power steering pump pulley - if it pulls out then you have a broken pump shaft.
97 Ford F-350 diesel with a 7.3 power stroke how do you remove the power steering pump pulley?
n way around it you have to pull the radiator to get the puller on the pulley
How do you tighten the power steering pump belt on a 94 Acura Vigor?
The power steering belt has an adjustment pulley. To tighten the belt on a 1994 Acura Vigor loosen the adjustment pulley and pull it up higher than tighten it.
How do you pull the power steering pulley off of a 1999 454 Chevrolet?
Go to your local auto parts store and get the rental pulley puller. That's what you need.
How do you pull a pulley from a power steering pump on a S10 Chevy?
There is a special puller made for this. Maybe you could rent one.
How do you replace a power steering pulley?
buy what's called a "power steering pulley puller" you can get this from harbor freight for pretty cheap. this tool pushes against the shaft using a bolt while grabbing the lip on the pulley in order to pull it off. you pretty much need this tool because the pulley is pressed on there very tight.
How do you replace water pump on 94 camaro 3.4 liter?
You have to pull the serp. belt, coil packs, power steering pump pulley, power steering pump mounting bracket, and then you can get the water pump out.
How do you pull a pulley on a power steering pump on a 2000 Chevy blazer?
It requires a special PULLER. Some parts stores will rent 1 to you.
Replace seal in power steering?
If it's on the power steering pump ? You have to pull down the pump and disassemble it ,remove the pulley and pump cover screws,be careful of the impeller it has small parts that might get lost.If it's on the steering rack you have to pull it down too and you need a loy of tools ans a lot of time.
1994 ford 250 and trying to pull the power steering pulley off and having trouble you are using a small gear puller and it keeps sliding off even when some one holds it on and a large gear pulley?
it takes a special tool to pull that you can rent one at the autoparts store you need it to pull and install pulley
How do you change power steering hoses on 1985 GM sierra 2500 350?
pull the p/s pulley off of the pump, the rest is easy.
How do you remove a power steering pump pulley on a 1999 ford Au?
To remove the power steering pump pulley on a 1999 Ford AU, you'll need a pulley puller tool specifically designed for this purpose. First, disconnect the battery and remove the serpentine belt from the pump. Then, attach the pulley puller to the pulley, ensuring it's securely fastened, and turn the tool's screw to pull the pulley off the shaft. Once removed, you can proceed with any necessary repairs or replacements.
