To put a driver's side window back on track on a Ford Expedition you will have to reseat the window. Do this by removing the door panel and putting the window back in place. You can use silicone or Gorilla glue to attach the window. Leave the window in the up position for at least one day once you have it back on place.
Take door panel off. and put window back on track.
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
Take the door panel off and put it back on the track
Take off the inner door panel then remove them insulation plastic then reach inside and adjust it back on track feeling it with your hands
take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.
mY PASSENGER SIDE WINDOW CAME OFF THE TRACK AND YOU NEED TO TAKE OFF DOOR PANEL,REMOVE SPEAKER ,LOSSEN 1 BOLT THAT HOLDS THE TRACK (ABOVE SPEAKER) WINDOW SHOULD GO BACK IN SOME WHAT EASY.THEM TIGHTEN BOLT AND PUT PANEL BACK ON.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
I have the same problem on my 1998 Ford Expedition XLT. I have put it back on track about 5 times and keeps coming off again and again. I'm going to use the same glue the windshield installers used. I'm going to buy a tube of the glue from them, this will resolve the window from coming off track.
Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.
my passenger window came out of track on my 2000 323i wagon when i put it back on track i had to unbolt the passenger side airbag ,i did not disconnect iti only unbolted it now my airbag light is on,can i reset it without going to the dealer,thanks
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.