I bought a 17mm ring end wrench to apply to the belt tensioner pulley nut. When you bear down on this, the tensioner pulley moves out of the way and the belt can be replaced or removed much more easily. I suggest you check the necessary wrench size before you buy one, just to be sure for your application.
The alternator on a 1986 Buick Century is located on the front of the engine, typically mounted on the driver's side. It is driven by a belt connected to the engine's crankshaft. To access it, you may need to remove the serpentine belt and possibly some other components, depending on the engine configuration.
Remove the serpentine belt take out the bolts that hold the alternator to the engine disconnect the wires from the alternator Yes, but first step: remove the negative battery cable from the battery. You might get some fireworks otherwise.
Under the alternator. You must remove the alternator to get to it.
I need to know if I need a special to to change my serpentine belt on a 2001 Buick Regal
In the alternator.
Disconnect the 1988 Century battery. Remove the alternator battery. Disconnect the alternator wiring, then unbolt the alternator. Bolt in the new alternator, then reverse the procedure to finish the installation.
How do you Change a fuel pump on a 1985 Buick Century?
It's located behind the alternator, you can easily be removed if you temporary take out the alternator.
There is no such thing as a 2005 Buick Century
Hey Joe==Take the serpentine belt off and then take the neg battery cable off then remove the wires from the alternator then take the bolts out and remove the alternator. GoodluckJoe
To remove the alternator from a 2006 Buick Terraza, first, disconnect the negative battery cable to ensure safety. Then, remove any components obstructing access to the alternator, such as the serpentine belt and possibly the engine cover. Unbolt the alternator from its mounting bracket and disconnect the electrical connectors. Finally, carefully lift the alternator out of the engine compartment.
To remove the alternator from a 1994 Buick Roadmaster, first disconnect the negative battery cable to ensure safety. Then, remove the serpentine belt by loosening the tensioner and sliding the belt off the alternator pulley. Next, disconnect the electrical connectors from the alternator and remove the mounting bolts. Finally, lift the alternator out of the engine bay.