The alternator on a 1986 Buick Century is located on the front of the engine, typically mounted on the driver's side. It is driven by a belt connected to the engine's crankshaft. To access it, you may need to remove the serpentine belt and possibly some other components, depending on the engine configuration.
Under the alternator. You must remove the alternator to get to it.
In the alternator.
Disconnect the 1988 Century battery. Remove the alternator battery. Disconnect the alternator wiring, then unbolt the alternator. Bolt in the new alternator, then reverse the procedure to finish the installation.
It's located behind the alternator, you can easily be removed if you temporary take out the alternator.
The voltage regulator on a 1986 Buick Skyhawk is located inside the alternator. It controls the amount of power sent to charge the batter based on its current state.
1,4,2,3
246135
Loosen the alternator belt with the tensioner pulley. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
If you have a 3.3L the PVC valve is located under the alternator.
Yes
Pimp My Ride - 2004 Jake's 1986 Buick Century 4-7 was released on: USA: 7 August 2005
The 1987 Buick Century typically comes with an alternator rated at 105 amps. This alternator is designed to support the vehicle's electrical system, including the battery and various accessories. It's important to ensure compatibility with the specific engine option in your Century, as variations may exist. Always refer to the owner's manual or a repair guide for precise details and specifications.