0
have some one hold the lift gate up, remove the small retainer clip on one side of support remove that side then the other side of the same support in stall the new one so it in the same directions as old one hold support over stud push support onto stud do same for other side
What else can I help you with?
How do you remove a tailgate from a 1995 s 10?
Open the tailgate, remove the retaining cables from the studs, pull out on the passenger side of the tailgate.
How do you install the passenger window on a windstar?
The passenger window on a windstar is best installed by a professional. However, if you have some auto repair experience, you can easily remove the door panel on the door by removing the screws and then you will be able to install the new window.
How do you remove tailgate lock on 1989 S-10 blazer?
To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
How to remove the Pontiac Montana tailgate panel?
cant open tailgate
How do you replace tailgate handle on Chevy 2000 s10?
First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.
How do remove the tailgate on Honda Ridgeline?
To remove the tailgate on a Honda Ridgeline, first, lower the tailgate fully. Locate the two bolts on each side of the tailgate hinge; these typically require a 10mm socket. Remove the bolts, then gently lift the tailgate upwards to detach it from the hinges. Be sure to have a second person assist, as the tailgate can be heavy and awkward to handle.
96 ford Windstar power window motor removal?
I need to know the best way to remove and install the new window motor for a 96 Ford Windstar drivers side. Ray
89 bronco . How do you remove tailgate motor?
To remove the tailgate motor from an '89 Ford Bronco, first, ensure the tailgate is fully closed. Disconnect the battery to prevent any electrical issues. Next, remove the interior panel from the tailgate by unscrewing or unclipping it, then locate the motor, which is typically secured with bolts. Finally, disconnect the wiring harness and unbolt the motor to remove it from the tailgate.
How do you change the lock on fiesta mk 6 tailgate?
To change the lock on a Fiesta MK6 tailgate, first, ensure the tailgate is open and disconnect the battery to avoid electrical issues. Remove the interior trim panel by taking out any screws and clips, then access the lock mechanism. Disconnect the wiring harness and remove the lock assembly by unscrewing it from the tailgate. Install the new lock by reversing the process, ensuring everything is securely reattached before reassembling the trim.
How to remove a tailgate from a 2005 Chevy Silverado?
Simply remove the cables that support the tailgate. They just clip off. Support your tailgate so that you don't scratch the paint. Lift the tailgate towards vertical, lift and one side will now come off the hinge. Remove the tailgate from the other side by pulling horizontally. Reinstall oppposite to these directions
How do you remove a Zafira tailgate?
To remove the tailgate of a Vauxhall Zafira, first, ensure the vehicle is parked securely and the battery is disconnected for safety. Remove any trim panels or covers that conceal the tailgate hinges and wiring. Disconnect the electrical connectors for the tailgate's lights and any other components. Finally, unbolt the hinges and carefully lift the tailgate off the vehicle.
How do you replace the tailgate latch on a 2003 Nissan Frontier?
To replace the tailgate latch on a 2003 Nissan Frontier, first, open the tailgate and remove any screws or fasteners securing the latch assembly. Disconnect the latch mechanism from the tailgate by releasing the clips or bolts. Install the new latch by reversing the removal process, ensuring it is securely fastened and properly aligned. Finally, test the tailgate operation to ensure the new latch functions correctly.
