answersLogoWhite

0

You remove door panel by first removing two screws. One screw behind the door handle and the other inside the hand grab hole where you put your hand when you shut door. If you have speakers in the door, remove speaker grill and remove three screws used to hold on the door panel. Then simply pull on the bottom of the panel and work your way up until all the plastic fasteners are pulled loose. Then lift panel up to free the top by the window. Use screwdriver to release the plastic clip and unhook the rod that hooks to door handle. Disconnect all the wire connections then all the plastic retainers that fasten the wires to the door. Pull the rubber boot out of the door so you can fish all the wiring out of the door. Remove the door catch from door jam by removing two torx head screws. Remove bolts that fasten hinges to door.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you remove anti theft system on 1995 Chrysler Cirrus?

How do i remove the anti theft system on my 1995 Chrysler Cirrus?


What size door speakers are in a 1997 Chrysler cirrus?

6 3x4


How do you remove the transmission from a 2000 Chrysler Cirrus with 6 cylinder engine?

was wondering if someone can tell me how in detail to remove the tranny from my 1997 chrysler cirrus i need to replace the torque converter seal


How do you replace the radio in a 98 Chrysler cirrus?

Remove the instrument bezel.


Where is the door ajar bell located on a 1996 Chrysler Cirrus?

It is inside the body computer.


How do you acess the fuel pump to a 1996 Chrysler cirrus?

You have to remove the fuel tank.


When was Chrysler Cirrus created?

Chrysler Cirrus was created in 1995.


Change rear door lock on chrysler cirrus?

To change the rear door lock on a Chrysler Cirrus, start by removing the door panel. Use a screwdriver to take out any screws and gently pry off the panel to access the lock mechanism. Disconnect the wiring harness and remove the old lock by unscrewing it from its mounting. Install the new lock by reversing the process, ensuring all connections are secure before reattaching the door panel.


How do you get to the battery in a 2000 Chrysler Cirrus?

Remove left front wheel, remove inner fender well, remove battery.


How do you get to the back spark plugs on a 2000 chrysler cirrus?

You have to remove the upper intake manifold.


Where is the heater control valve on a 1999 Chrysler cirrus?

The cirrus does not use a heater valve. The cabin temperature is controlled with the an airflow controlling door inside the dash.


How do you reset computer in 1996 Chrysler cirrus?

Remove battery ground for at least two minutes.