Firstly your going to want to disconnect the battery or remove the airbag fuse, and wait 10 or so minutes for it to discharge. So you don't get injured from it.
next there should be a small panel either side of the steering wheel that you remove with a flathead screwdriver. Once done there is 2x10mm bolts that need to be removed to take out the airbag (will need to undo the airbag wires). After that, remove the screws that hold the wheel on and yank it to remove (will need to be careful of all the wires!!)
The Ford BA Falcon car was made between September 2002 and October 2005. It was a full size four door vehicle with features such as cruise control on the steering wheel and larger ventilation ducts.
It is usually fairly simple to remove the boot strut on a BA Falcon. Simply remove the metal clips that are on either end of the strut. If the clips are rusted into place, however, you may need to clean them first.
If you're asking if the BA Falcon is a Ford, yes.
Ford BA Falcon was created in 2002.
To change the front indicator lights on a BA Falcon one must turn the wheel inward in order to access the front of the splash shield. The lower three screws can now be removed and the bulb can be changed.
how much will cost me to change the bushing of ba falcon
The bonnet release cable breaking is a common problem in the Ford BA Falcon, and if done incorrectly removing or replacing it can result in having to replace the fuse block as well. It is best to have this done by a qualified mechanic.
the fuse for the dash lights in a ba falcon is fuse #27, 10 amp fuse (red)
No i dont think so. I have a ba falcon xt ute and I looked everywhere for one but couldn't find it.
There is none!
no
The top speed of the Ford Falcon BA XR8 is 141.5 miles per hour. The Ford Falcon BA XR8 is a full sized car made by Ford Motor Company and it has four doors.