To remove the clock from a 2004 Ford Freestar, first, disconnect the vehicle's battery to ensure safety. Next, use a flathead screwdriver or trim removal tool to gently pry off the trim surrounding the clock. Once the trim is removed, you can access the clock assembly; unscrew it if necessary and carefully disconnect any wiring harness before pulling it out. Reassemble in reverse order once the clock is replaced.
Ford Freestar was created in 2004.
( 26 U.S. gallons ) for a 2004 Ford Freestar
One reason a 2004 Ford Freestar may stall out is because of a water damaged PCM. This is a common problem with the 2004 Ford Freestar.
To change the analog clock light in a 2005 Ford Freestar, you'll need to first remove the clock assembly from the dashboard. This typically involves removing the surrounding trim and unscrewing the clock unit. Once you have access to the clock, you can replace the burnt-out bulb with a new one. Reassemble the clock and trim after the replacement is complete.
Remove battery cable, reattach first step.
According to the 2004 Ford Freestar Owner Guide : ( 26.0 U.S. gallons )
how can ford freestar 2004 water pump be replaced
On a 2004 Ford Freestar : The transaxle ( transmission ) is located in the engine compartment on the drivers side . It is bolted to the " rear " of the engine
The fuse box on a 2004 Ford Freestar is located under the dashboard on the driver's side. To access it, you need to remove the cover panel beneath the steering column. There is also a second fuse box located in the engine compartment, near the battery.
According to a website I was looking at : For a 2004 Ford Freestar ( 3.9 and 4.2 ) ( 15 city / 21 highway , miles per U.S. gallon )
firewall 1-----2-----3 4-----5-----6 front of Ford Freestar > driver
35 lbs