* On models with power door locks and/or power windows disconnect the negative battery cable.If equipped with Delco Loc 2 or Theftlock audio system make sure you have the activation code * On models with power door locks pry the power door lock switch out of the door trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with power windows pry the power window switch out of the trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with manually-operated windows remove the window regulator handle * Remove the trim panel screws * Once all of the screws are removed detach the trim panel from the door disconnect any electrical connectors and remove the trim panel from the vehicle by lifting it up and away from the door
are they wind up windows or power windows? for power windows remove the door panel screws and pull. for wind up windows remove small metal snap rings behind the window handle. remove them and then remove all door panel screws and pull door panel off.
To remove the door panel on a 2001 Chevrolet Cavalier, start by disconnecting the negative battery cable to prevent any electrical issues. Remove any screws located in the armrest and around the edges of the panel, then gently pry off the panel using a trim tool to avoid damaging the clips. Once loose, lift the panel upward to detach it from the door, and carefully disconnect any wiring harnesses for power windows or locks before fully removing the panel.
To remove the door panel on a cavalier there are four screws on the under side and the back of the bottem lip. Remove those screws then there are 2 screw in the door handle. Remove those. remove the triangle piece of plastic where the mirror controls are then give it a little tug and the door panel should pop loose then lift up and walk away with it. If you have crank windows then you have to remove the crank lever and if you have electric locks the you have a clip you have to un do that powers the switch.
The door panel in a 1994 Chevrolet Cavalier Z24, can be removed by first removing the lens covers from any lights in the door. Then, remove the light sockets themselves with a screwdriver. Using a flat screwdriver, gently pop the clips on all sides of the door panel and remove it.
remove glove box panel ecm is located behind panel
go to control panel. --> network connections... --> remove windows logon from there.. and restart the computer
Remove it from Control Panel, side bar, add or remove Windows components.
i have a '96 cavalier and all u have to do is stick a screw driver in the panel beside the radio to where u can get your fingers in there and just pull it out. but be careful that u dont break the panel or the clips.
You have to remove the inside panel, where the window crank is, or would be.
Remove the dppr panel and there are screws on the inside.
If you're using Windows XP: 1. Go to the Control Panel > Add or Remove Programs. 2. Scroll down for Iminent and Remove it. If you're using Windows Vista or Windows 7: 1. Go to the Control Panel > Programs and Features. 2. Scroll down for Iminent and Remove it.
Go to 'Start' - 'Control Panel' - 'Add/Remove Programs'.