Caution:On models equipped with Delco-Loc 2 or Theftlock audio systems make sure you have activation code * Disconnect the negative battery cable * Drain the cooling system * Disconnect the heater hoses at the heater core inlet and outlet on the engine side of the firewall and plug the open fittings * From the inside of the car remove the lower right dash insulator panel and the glove box * Disconnect the ducts from the heater cover * Remove the instrument panel from the passanger compartment * Remove the heater core cover * Remove the heater core clamp bolts and clamps then slide the heater core out carefully * Installation is reverse of removal
Remove the water supply hoses to your 1998 Chevy Lumina heater core. Remove the heater core retaining bolts. Reverse the procedure to install the new heater core.
You will need to remove the water supply hoses from your 1998 Oldsmobile Intrigue heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
please tell me how to remove the heater to get too the heater coil
how to change heater core in 98 suburban
To remove the heater core from a 1984 Oldsmobile 98 Regency, first, disconnect the battery and drain the coolant from the radiator. Next, remove the dashboard and any necessary components to access the heater core housing. Disconnect the heater core inlet and outlet hoses from the engine compartment, then unbolt and carefully remove the heater core from its housing. Finally, reverse the process for installation, ensuring all connections are sealed properly to prevent leaks.
How do I replace heater core on 98 Buick lesabre
How do I replace the heater core in my 98 cadillac deville
how do you replace a heater core in a 91 Oldsmobile 98
To remove the heater core from a 1998 Suzuki Esteem, first, disconnect the negative battery terminal and drain the coolant. Next, remove the dashboard and the center console to access the heater core housing. Disconnect the hoses from the heater core, unfasten any retaining clips or screws, and carefully remove the heater core from its housing. Reassemble in reverse order, ensuring all connections are secure and refill the coolant.
Remove the two hoses that go through the firewall to the heater. Connect these two hoses together.
The dash must be completely removed in order to gain access to the heater box. Then the heater hoses are disconnected and the heater box is removed and opened up. That gains access to the heater core for relacement.
under the passenger side behind glove box the is a panel you must remove be careful for wires remove panel to display heater core remove hoses from under hod and then pull heater core out from inside passenger side