0
give up and get a new car is a stupid solution. what you should do is try to locate visible screws to remove on the door (you will have to use a Philip's head for them). if there are non, pop off the little speaker and window control (flat head srewdriver) and there are screws in there as well. i am currently replacing the speakers on mine and i am working on the backseat today, so I'll post what i find out as i go on with it.
What else can I help you with?
How do you replace front speakers in a 1999 Saturn sc?
Remove the inner door panel.See link below.
How do you replace a serpentine tensioner on a 1997 Saturn SC1?
Remove the Right wheel and inner plastic fender which will allow you access to the tensioner side of the motor. There will be a few bolts holding into place on the block. Remove the bolts and remove the entire tensioner assembly. Reverse for replacement.
How do you remove the front dash speaker on a 2010 Chevy Tahoe?
You will need to remove the screws in the door pull area, remove the power window panel, and the door lock pull, from there you carefully pop the plastic retainers holding the inner door panel to the door, work your way around carefully prying them away. The speaker will be bolted to the steel door behind the grille that is a part of the door panel, unbolt it and replace with the same size new speaker.
How do you remove the speaker cover on the 1993 Camry xle driver side door?
YOU MUST REMOVE, UNFORTUNATELY, THE INNER DOOR PANEL TO GET TO THE CLIPS OF THE COVER....BB
How do you remove the exterior door handle on a 92 Saturn SL2?
Should be able to access after removing inner door panel
How do you remove a passenger side door handle to replace it on a 2003 f-150?
Remove inner door panel for acess
How do you replace door check arm on 2005 for expidition?
Remove inner door panel and replace complete door check assembly
How do you replace the driver side sliding glass window in a 1997 Chevy astro van?
remove the inner pannel. That will put you at the assembly. with windo up, remove assemblt. then replace
How do you replace the inner tube of a bicycle?
To replace the inner tube of a bicycle, first remove the wheel from the bike. Use tire levers to take off the tire and expose the inner tube. Remove the old tube, then insert and inflate the new tube. Carefully put the tire back on the wheel and reattach it to the bike.
How can I replace a road bike inner tube?
To replace a road bike inner tube, follow these steps: Remove the wheel from the bike. Use tire levers to remove the tire from the wheel. Take out the old inner tube. Insert the new inner tube into the tire. Put the tire back onto the wheel. Inflate the new inner tube to the recommended pressure. Put the wheel back on the bike.
How do you replace the battery in a 2003 Chrysler Sebring?
Remove driver side front tire. Remove inner fender liner. Remove battery. Reverse steps.
How do you replace the alternator on a Saturn SC1?
JACK THE CAR UP, REMOVE THE NEGATIVE WIRE CABLE FROM THE BATTERY, REMOVE THE PASSENGER SIDE TIRE AND THE FRONT INNER FENDER (PLASTIC). ONCE THESE ARE REMOVED THERE ARE ONLY 2 BOLTS AND ITS OUT. BUT, IT CAN BE FINANGLED THROUGH THE ENGINE BAY WITHOUT REMOVAL OF EITHER BUT ITS A TIGHT FIT.
