0
What else can I help you with?
How do you tighten the serpentine belt on a 1997 Saturn?
You don't. The belt tension is automatically adjusted via a spring loaded tensioner. If the serpentine belt is noisy or worn out prematurely. replace the tensioner. The belt should be inspected for cracks and other signs of wear. Replace worn out belt(s) before they break leaving you stranded.
How do you replace the belt tensioner on a 1997 c200?
To replace the belt tensioner on a 1997 Mercedes-Benz C200, first, disconnect the negative battery terminal for safety. Then, use a socket wrench to relieve tension on the serpentine belt and remove it from the tensioner. Next, unbolt the old tensioner from its mount, install the new tensioner, and secure it with bolts. Finally, reattach the serpentine belt, ensuring it is properly routed, and reconnect the battery.
How do you remove a belt tensioner for a 1997 Pontiac sunfire?
Remove the serpentine belt. Tensioner is below Alternator. Remove the three mounting bolts on the tensioner baracket assembly. Replace entire unit.
How do you tighten the power steering belt on a 1997 Saturn SW1?
Powe stering belt (aka serpentine belt) is tightened with a belt tensioner. A new tensioner is needed if the belt is loose or a new belt
How do you replace the serpentine belt in 1997 grand am?
How do you replace the serpentine belt in 1997 sunfire
How do you change belt tensioner pulley 1997 aerostar ford van?
To change the belt tensioner pulley on a 1997 Ford Aerostar van, first, disconnect the negative battery terminal for safety. Then, locate the serpentine belt and use a wrench to relieve tension on the tensioner pulley, allowing you to remove the belt. Next, unbolt the old tensioner pulley from the tensioner assembly and replace it with the new pulley. Finally, reattach the serpentine belt and reconnect the battery terminal.
How do you install serpentine belt on a 1997 caravan?
slacken tensioner with a long wrench, then slip belt off. Replace opposite way. Takes about 15 minutes.
Where is the serpentine belt adjustment bolt on a 1997 Chrysler Town and Country?
The serpentine belt tensioner is spring loaded. There is no adjustment.
Serpentine belt tensioner 1997 3.8 caravan?
It will be the smooth pulley(s)-not ribbed.
How do you replace serpentine belt on 1997 olds lss?
To replace the serpentine belt on a 1997 Oldsmobile LSS, first, locate the belt routing diagram, typically found on a sticker near the radiator or under the hood. Use a wrench to relieve tension on the tensioner pulley and remove the old belt. Route the new serpentine belt according to the diagram, ensuring it sits properly on all pulleys. Finally, release the tensioner to secure the belt, and double-check the alignment before starting the engine.
How do you loosen the tensioner to replace the serpentine belt in a 1997 cavalier?
Should be a square hole either 3/8" or 1/2" place a breaker bar in this hole and push or pull to relieve tension on belt tensioner to remove belt
How do you replace the serpentine belt one a 1997 infinity qx4?
To replace the serpentine belt on a 1997 Infiniti QX4, first, disconnect the negative battery terminal for safety. Locate the tensioner pulley and use a wrench or ratchet to relieve tension on the belt. Remove the old belt by noting its routing, then install the new belt following the same path. Finally, release the tensioner to secure the new belt and reconnect the battery terminal.
