To remove the radiator from a 1988 Cadillac Seville, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the drain plug at the bottom of the radiator and then disconnect the upper and lower radiator hoses. Next, remove any mounting bolts or brackets securing the radiator, and finally, lift the radiator out of its position carefully, ensuring not to damage any surrounding components. Remember to dispose of the old coolant properly and check for any leaks before reinstalling the new radiator.
On a 1988 Cadillac Seville, the horn is typically located behind the front grille, near the radiator. It is mounted on the driver's side, often attached to the frame or other components in the engine compartment. To access it, you may need to remove the grille or other surrounding parts.
How do you replace the water pump on a 1988 Cadillac Seville?
It is built in to the alternator.
The Cadillac Seville STS or Seville Touring Sedan was manufactured by Cadillac and sold during the years of 1988 to 2012. During this time, a series of STS models were assembled. The last STS to be asembled was in 2011 on 4 May.
on the intake manifold near the throttle body
Most likely 134a not true, factory ac is r12.
Radiator drain plug (petcock) is located on the passenger side of the radiator underneath on the very bottom of the radiator.
Where is the Drain Plug for the Radiator for a 1993 De-ville?
Hi, I have an 1988 Coupe Deville with same issue. Did you ever find out how?
Figured it out... Remove plastic trim from on top of radiator support. Remove grill. Remove battery & light sockets. remove 4 bolts... remove headlight assembly. Cheers
get under the car and reach between bumper and radiator and slide the hook over and u can open the hood
I would like to no wat all got to b removed on the bottom end of car