answersLogoWhite

0

What else can I help you with?

Related Questions

How do you remove smog pump on 92 roadmaster?

To remove the smog pump from a 1992 Buick Roadmaster, first, disconnect the negative battery cable to prevent electrical issues. Next, locate the smog pump, which is usually mounted near the front of the engine, and remove any hoses and electrical connections attached to it. After that, unscrew the mounting bolts securing the pump to the engine and carefully remove the pump. Finally, ensure to cap or block any openings to prevent exhaust leaks if you plan to run the vehicle without the smog pump.


Can you remove a smog pump on a dodge slant six to pass inspection?

The smog pump is designed to help clean the air the exits the exhaust. It might actually be detrimental to remove it if you have to pass emissions testing.


How do you remove smog pump on ford e350 van?

To remove the smog pump from a Ford E350 van, first, ensure the engine is off and cool. Disconnect the negative battery cable, then locate the smog pump, usually mounted on the engine. Remove the hoses connected to the pump, followed by the mounting bolts securing it to the engine. Finally, take out the pump and cover any open ports on the engine to prevent debris from entering.


Can you remove the smog pump from a 1995 Caprice and still pass emissions in Missouri?

NO.


Can you remove the smog pump on a 1983 Elcamino?

Not legally according to Federal Law.


What is the smog pump?

pumps smog


Can you remove smog pump 1995 Chevy caprice?

Yes, but you have to have the PCM programmed for the removal. You might fail visual portion of a smog check, however.


How do you take off the smog pump pulley on a 92 ford thunderbird 5.0?

To remove the smog pump pulley on a 1992 Ford Thunderbird 5.0, first, relieve the tension on the serpentine belt by using a wrench to turn the tensioner pulley. Next, use a socket and ratchet to remove the bolts securing the smog pump pulley to the pump. Once the bolts are removed, carefully pull the pulley off the smog pump shaft. Make sure to inspect the pulley and shaft for wear or damage before reassembly.


How do you re-route the belt on a 350 tpi motor so you can remove the smog pump?

Your best bet is to keep the smog pump in the truck. Just take the guts out of it, this will allow the pully to spin freely. Most states require the smog pump for inspection. Thank god it's only a visual.


Where is the smog pump in a 1998 mustang?

The smog pump is located under the right front fender, I think you have to remove the tire to reach it. Good luck finding a replacement, if you do let me know, I am looking for one now.


Where is the smog pump on a 2001 Aurora?

The 2001 Oldsmobile Aurora smog pump can be found on the left-hand side of the engine. The smog pump will be near the exhaust manifold.


Removal of smog pump on 94 camaro Z28?

`remove drive belt. disconnect primary and secondary ignition coil harness.remove AIR pump mounting bolts and remove the unit.