Location on passenger's side (right side) of engine near back of engine... for details.. suggest you go to corvetteforum.com and sign up.. free.. this is not spam.... if you can't find the answer there.. it ain't possible to do... for all Vette questions check there first.. usually very detail instructions and diagrams....
Remove the positive cable from your 1975 Chevrolet Corvette battery. Remove the two cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Remove the positive cable from your 1995 Chevy Corvette battery. Remove the cables from the front of your old starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
== ==
You should begin by removing the positive cable from your 1988 Chevy Corvette battery. Remove the cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.
you have to drop exhaust be able to remove starter.
To remove the starter from a 1986 Corvette, first disconnect the negative battery cable to ensure safety. Then, lift the vehicle and support it on jack stands. Remove the starter mounting bolts and disconnect the electrical connections, including the battery and solenoid wires. Finally, carefully pull the starter out from its position and set it aside.
To remove the starter from a 1989 Corvette, first disconnect the negative battery cable to ensure safety. Then, access the starter by lifting the car and removing any obstructing components, such as the heat shield. Unbolt the starter from its mounting using the appropriate socket size, and carefully disconnect the electrical connections, noting their positions for reinstallation. Finally, remove the starter from the vehicle.
A Corvette that was built in late 1976 up to late 1977.
I have a 90' ZR1 and the starter is under the plenum a costly job about $700 plus parts. They have to remove the top of the engine to get to it.
You have a bad bendix spring or solenoid,either way you will have to remove the starter and replace whole or just the engagement solenoid
On a 2007 Corvette, the starter is located at the rear of the engine, near the transmission. It is positioned on the passenger side, making it somewhat accessible from underneath the vehicle. To replace or service the starter, you may need to remove the protective cover and possibly the exhaust components for better access. Always ensure the battery is disconnected before attempting any work on the starter.
== ==