answersLogoWhite

0

pry it up off of the motor splines to take it off.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Will a 1969 Chevy nova rear bench seat fit in a 1973 Chevy nova?

Yes.


How do you remove a car engine from 1966 Chevy Nova?

how to remove a 1966 283 engine from a Nova


What is the length of a 1969 Chevy Nova rear-end?

The length of the 1969 stock Chevy Nova rear end is sixty and 1/4 inches at its widest point. This includes the width of the rear hubs.


Where is the windshield wiper pump located on a 1988 Chevy Nova?

look on the bottom of the washer fill tank.


What is the bolt pattern on 1969 Chevy Nova?

5 on 4, and 3/4.


Heater core removal from 1972 Chevy Nova?

Drain the water from your 1972 Chevy Nova cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts.


What newer style bucket seats will fit a 1969 Chevy Nova?

Just about any newer style bucket seat can be made to fit the nova.


How do you replace water pump on 87 Chevy Nova?

Remove the belt from your 1987 Chevy Nova water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.


What size Allen wrench to remove a caliper on a 1988 Chevy Nova?

3/8


How do you remove manifold on a 1973 Chevy Nova?

what maniofold are you asking about? intake or exhaust, and what kind of engine do you have?


Did the 1969 Nova have two doors or four?

The 1969 Chevy Nova was available in both a two door coupe- body number 27, which cost $2267, and a four door sedan- body number 69, which cost $2237.


How do you change front coil springs on 1969 Chevy Nova?

To change the front coil springs on a 1969 Chevy Nova, first, safely lift the vehicle and secure it on jack stands. Remove the front wheels and then disconnect the shocks and any components that may obstruct the spring removal, like the sway bar links. Use a spring compressor to safely compress the coil springs, then remove the lower control arm bolts to release the springs. After replacing the old springs with new ones, reverse the process to reassemble everything.