on my 95 i took the driver side tire and brake assembly off to get to it on my 95 i took the driver side tire and brake assembly off to get to it
how to install a altinator on a 1991 acura integra
how do you replace an alternator on a 1990 integra
How to install a boost gauge in a acura integra?"
Remove the belt from your 1990 Acura Legend alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
You can remove the governor on an acura integra by having the ecu chipped.
remove driver wheel and break assembily. drop lower ball joint and pop the axel out but dont pull on it pry it from the trany. then u have to lossen the alternator and the bracket it was attached to then revers to install
Yes, It will fit a 90-93
Bearings require a mechanical press to be properly changed in an Acura Integra. Remove the hub from the vehicle and take it to a press. The machine will properly install a new bearing and ensure a safe install.
Hou much should it cost to replace an alternator for a 1988 acura integra Ls?
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.
Remove the Oil Filter and remove the Alt. through there. It will take some twisting and turning to get it out and In but it'll work
same as for a 90'How_do_you_replace_the_alternator_on_a_1990_Acura_Integra