You can't. The springs around them need to be removed with a spring compressor and put back on the new struts with the spring compressor if the springs are still good. These springs are under very high tension and if you try to do it yourself you'll get a strut right through your skull! The rear shocks are easy, but for struts, take it to a professional, then it will be aligned properly too.
To install front struts on a 1991 Pontiac Sunbird, start by safely lifting the vehicle and removing the front wheels. Next, disconnect the strut assembly from the steering knuckle and any attached components, such as the brake line and sway bar link. Remove the strut mounting bolts from the top of the strut tower under the hood. Finally, replace the old struts with new ones, reassemble all components in reverse order, and ensure everything is securely tightened before lowering the vehicle.
how to remove rear struts on 2005 chevy cobalt
To replace the hatch struts on a Pontiac Aztek, start by opening the hatch and securing it to prevent it from falling. Use a flathead screwdriver to gently pry off the clips or covers that hold the struts in place, then detach the old struts from the mounting points at both ends. Align the new struts with the mounting points and snap them into place, ensuring they are securely attached. Finally, test the hatch to confirm that it opens and closes smoothly.
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
To replace the rear struts on a 2004 Pontiac Grand Am, first safely lift the vehicle and support it on jack stands. Remove the rear wheels, then unbolt the strut assembly from the lower control arm and the upper mount in the trunk area. Replace the old strut with a new one, ensuring all bolts are torqued to specifications, and reassemble the components in reverse order. Finally, check the alignment and test drive the vehicle to ensure proper function.
Compress the shock spring with a spring compressor. Remove the top strut bolt. Remove the bottom strut bolt. Reverse the process to install the new struts.
When replacing struts, ALWAYS replace them in pairs.
hou to replace rear struts
The cost to replace struts on a 2003 Pontiac Aztek typically ranges from $600 to $1,200, depending on the quality of the parts used and labor costs in your area. This estimate usually includes both the cost of the struts and labor. It's advisable to get quotes from a few different mechanics to ensure you get the best deal. Additionally, consider whether any other suspension components may also need replacement.
Wat struts
Sorry, but I'm looking for my rattle as well. I have a 2001 Pontiac Grand Am. Someone told me it was the struts. Well, new struts, same rattle. My rattle is right in the passenger side rear seat area. Any bump, no matter how small and I hear it. Had the seats out. All I can say is it's louder with the rear seats folded down. I've checked everything obvious.
How do you replace the front struts on jaguar x-type