How do I remove rear coil springs
Change clock on 99 expedition
Disconnect negative battery terminal. Allow 2-3 minutes for left over current to drain from airbag. Remove steering column trim piece. Remove airbag bolts behind steering wheel. Unplug airbag and remove. Remove steering wheel dampner. Remove big nut in center of steering wheel. Using a puller, remove steering wheel. Disconnect clock spring wireing harness. Remove any bolts holding clock spring in place. Remove old clock spring and replace with new. Repeat steps backwards for re installation. Hope this helps. There are also a couple videos you can watch. dormanproducts.com/video.
05 clock spring
how do you remove the grill from a 2008 ford expedition?
To replace the clock spring on a 1998 Ford, first disconnect the battery to ensure safety. Then, remove the steering wheel by loosening the nut and using a steering wheel puller if necessary. Next, detach the airbag module and carefully unclip the old clock spring from its housing. Finally, install the new clock spring by aligning it properly, reconnect the airbag, reassemble the steering wheel, and reconnect the battery.
NO
The clock spring is located inside the steering wheel behind the airbag.
Crash.
How do you remove the instrument panel in a 1998 Ford Expedition 5.4 Engine
how do you remove the right rear axle on a 1998 ford expedition?
how to remove the lines from the heater core on a 2001 expedition