answersLogoWhite

0

Tools needed: small flat head screwdriver, #2 Phillips screwdriver, window crank clip removal tool, ratchet with 8mm? deep well socket.

If you have crank window:

First with door open, use window clip removal tool (be careful clip is not lost).

With small flathead screwdriver, carefully remove speaker grill by gently prying around outside edges.

remove 3 screws in pockets around speaker (not speaker screws).

remove screw under covers in door pull and inside door lever cup.

Remove screw at front of door panel near hinge.

Gently pull door panel, starting at bottom, working around to the back of door to top, lift from bottom. Top is held in channel.

After inside door panel is off/removed, remove two screws holding black plastic cover on inside of door, back side of mirror (cover should fall off).

Remove three body plugs from under panel and plastic cover.

With 8mm? deep well socket remove three nuts from back of mirror, make sure to support mirror while removing nuts.

that's it, reverse to install new mirror.

I have not removed door panel from car with electric locks or windows, but I guess most of these instructions will be the same.

Power Window Instructions are exactly the same with the exception of the window clip removal tool is NOT required. I just completed my mirror installation and everything works great. Thanks for the help. Deno

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you replace the side mirror on a Plymouth breeze?

To replace the side mirror on a Plymouth Breeze, first, remove the interior door panel by unscrewing any visible screws and gently prying it off. Next, disconnect the wiring harness if the mirror is powered, then unscrew the old mirror from the outside of the door. Install the new mirror by securing it with screws, reconnecting the wiring if applicable, and reattach the door panel. Finally, test the mirror to ensure it functions properly before finishing up.


How do you change out the side mirror assembly?

how to replace passengerside outside mirror


How would you replace the mirror glass of a 1993 Ford Taurus outside rearview mirror?

If you go to www.automirrorglassonly.com it will tell you how to replace the mirror glass for the outside mirror. You can buy one there too. The outside mirror is just glued on , some parts stores sell replacement glass and you can glue the new one on


How do you install a new right side electric mirror on a 96 Plymouth Grand Voyager?

Go to this website. It will show how to replace the side mirror.


How do you replace an outside power mirror on an Oldsmobile Alero?

you probaly can't do it yourself so take it to a shop that can and if they have something to replace it with.


How do you replace side mirror on dodge spirit?

To replace the side mirror on a Dodge Spirit, start by removing the interior door panel to access the mirror's mounting bolts. Disconnect the electrical connector if your mirror is powered. Next, unscrew the old mirror from the outside of the door and replace it with the new mirror, securing it with the bolts. Finally, reattach the interior door panel and reconnect any electrical components.


Is it possible to replace the side view mirror on a 2002 Tahoe The outside body is OK?

yes. You can replace just the glass or the whole assembly.


How do you remove and replace outside rear view mirror on 2003 dodge ram?

96 dodge ram side rear view mirror will not stay in position


How to replace a broken outside mirror on a sonoma truck?

If you heat the mirror with a propane torch, you should be able to soften the glue and pick the mirror glass off. Get a replacement glass and silicone it on, using masking tape to hold it for 24 hrs. -- remove door panel, remove bolts to the mirror, (unclip wiring if a power mirror) replace.


Can you replace the mirror in the frame?

Yes, you can replace the mirror in the frame.


How do you replace the outside mirror on driver's side?

It would help to know what the year, make, and model of vehicle is, as there are different mirror assemblies in use.


How do you replace side mirror on an jaguar XK8?

To replace the side mirror on a Jaguar XK8, first, ensure the car is parked safely and disconnect the vehicle's battery. Remove the interior door panel by unscrewing the necessary fasteners and gently prying it off. Access the mirror by unscrewing the retaining bolts from the outside, disconnect the electrical connector, and then replace the mirror with the new one. Finally, reassemble the door panel, reconnect the battery, and test the new mirror.