how to replace passengerside outside mirror
You would have to change the entire mirror assembly, including the electrical connections. Merrill
You have to remove the inside door panel then you can see the holding assembly
Yes
Unscrew the three mounting screws on the underside of the mirror assembly.
It's not easy. There are five plastic retainer clips that have to be released to allow the cover on the front side of the mirror assembly to be removed. Two on top, Two on the botton, and one on the drivers side (near botton of side). Do this on a warm day when the plastic is more workable. You can only access them from the mirror side between the mirror frame and the mirror assembly body. It's not easy. When you finally are able to get the cover off the bulb is a snap to replace. Just turn the bulb assembly 90 degrees and it lifts out. Good Luck.
Try a glass shop
It is made as an assembly.
In order to replace the side mirror on a Ford Fusion, you must first take out the three bolts holding the inside of the assembly door. Then you need to disconnect the wiring harness and mirror assembly. To install it, you do the same thing but in reverse.
you change it
Mirror fixIf you look on the lower side of mirror there is a small hole/opening and a small straight blade screw that lossens the mirror from the housing. Undo the screw, remove mirror glass assembly and you will see mirror glass brackets that open & release glass
The motor itself is not replaceable. You have to replace the whole mirror assembly.
Passenger mirror access is same as drivers side. Three screws accessible inside door panel to remove entire mirror assembly. To remove mirror within the mirror assembly it just pulls off - snap fit of mirror mount to drive.