0
The whole door panel comes off by prying the bottom edges until the plastic retention clips pop loose, then pull up on the panel to lift it off the window sill. Some of the retention clips will likely break, so have a spare pack on hand for reinstallation. The inside door handle needs to be removed first. There is also a smaller panel on the door handle for the window and mirror switches. Remove that by prying up at the rear of the panel and then lifting it up and back. Be careful, as the plastic will be brittle and the teeth at the front of the panel may break. If that happens, the panel is pretty much ruined.
What else can I help you with?
How do you remove driver's side fuse panel cover on 1998 Oldsmobile Intrigue?
The fuse panel cover is on the passenger side in a 1998 Oldsmobile intrigue. Same location as vehicles that have it on driver side. Just pull on it and it will pop off.
How do you change the lights on the instrument panel on 99 Oldsmobile Intrigue?
To change the instrument panel lights on a 1999 Oldsmobile Intrigue, first, disconnect the negative battery cable to ensure safety. Then, remove the instrument panel by unscrewing the screws and gently prying it away from the dashboard. Locate the burned-out bulbs, twist them counterclockwise to remove, and replace them with new bulbs. Finally, reassemble the panel and reconnect the battery.
How do you remove the front driver side quarter panel on a 1998 Oldsmobile Intrigue?
Three Auto Upholster store tried to remove the visors from my 1998 Oldsmobile without success. My visor are literally disintegrating. I can't find replacement any place. I printed the pictures to them and followed them to no avail. (?) Please any recommendation will be highly appreciated. alvgcontact@gmail.com
How do you remove a door panel from a 1995 Oldsmobile Cutlass Supreme?
Using a screw driver, remove the screws and the clips from the door panel. Gently pull the panel away from the frame, and remove any wire connectors. Then pull the panel the rest of the way off.
Where are the blower relays in a 1999 Oldsmobile Intrigue?
There are three blower relays in the fuse panel under the hood on the passenger side. Remove and inspect the contacts for burn marks. If burnt replace.
How do you take door panel off a 2000 oldsmobile intrigue?
To remove the door panel from a 2000 Oldsmobile Intrigue, start by disconnecting the negative battery terminal for safety. Then, use a flathead screwdriver to gently pry off the plastic cover from the door handle to access the screws. Remove any screws securing the panel, typically located near the handle and along the edges. Finally, carefully pull the panel away from the door, releasing any clips, and disconnect any wiring harnesses for power windows or locks before fully removing it.
How do you remove instrument panel in 2000 Intrigue?
To remove the instrument panel in a 2000 Oldsmobile Intrigue, start by disconnecting the negative battery cable to ensure safety. Next, remove any trim pieces surrounding the panel, typically using a flathead screwdriver or a trim removal tool. Unscrew the bolts securing the instrument panel, then gently pull it out, taking care to disconnect any electrical connectors behind it. Make sure to document where each screw and connector goes for reassembly.
How do you remove the driver door panel on a 2002 Chevy Malibu?
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
How do you replace a blower motor in a 2000 Oldsmobile intrigue?
To replace the blower motor in a 2000 Oldsmobile Intrigue, first disconnect the negative battery cable. Remove the passenger side under-dash panel to access the blower motor, which is located near the firewall. Disconnect the wiring harness and remove the blower motor by unscrewing the retaining screws. Install the new blower motor by reversing the process, ensuring all connections are secure before reattaching the under-dash panel and reconnecting the battery.
How do you replace blower motor 1998 Oldsmobile intrigue?
To replace the blower motor in a 1998 Oldsmobile Intrigue, first disconnect the negative battery cable to ensure safety. Then, remove the passenger side lower dash panel and the blower motor cover. Disconnect the electrical connector from the old blower motor, unscrew it from its housing, and then install the new blower motor by reversing the process. Finally, reattach the dash panel and reconnect the battery.
Where is the flasher on a 1998 Oldsmobile Intrigue?
The flasher for a 1998 Oldsmobile Intrigue is typically located under the dashboard, near the steering column. To access it, you may need to remove a panel or cover. The flasher is often a small, cylindrical component that can be identified by its electrical connectors. If you're having trouble locating it, consulting the vehicle's service manual can provide specific guidance.
How do you remove the driver's side inside door panel on a 1993 Oldsmobile?
You take that crap off. If it doesnt budge get a jack hammer and tear it off from the top to bottom.
